Architectural Products
Facades and Residential
VitraPanel®
Aluminium & Composite Panels
VitraColor™
VitraPanel Interior™
Easy Eaves™
VitraClad™
Infrastructure Products
VitraPanel EC™
VitraPanel Noise Wall™
Coating Systems
Vitraflon 700™
Vitraflon 744™
Vitrathane 643™
Vitrathane 644™

Frequently Asked Questions (FAQ)

What is VitraPanel®?

VitraPanel® is a pre-finished panel usually based on high density (compressed) fibre cement. VitraGroup processes the cement sheets with its proprietary coating system. The finished product is a panel with an ultra smooth and hard finish which can last for more than 50 years.
VitraPanel® is waterproof, will not rot, corrode or support any growth of lichen, bacteria or mould.

Is it VitraPanel®?

VitraPanel® is manufactured with our own proprietary ultra high quality coating systems Vitrathane 643™ and Vitraflon 700™. Vitraflon 700™ is to our knowledge the only fluoro polymer coating system available on the market for wet spray application.
Ask for the type of system other panels are coated with and compare with our tests and warranties.

How do I install VitraPanel®?

The substrate manufacturers (James Hardie, CSR, and BGC) have installation manuals for their products (JH D3-1000, CSR "Express Wall", BGC compressed). To install VitraPanel® you have to strictly follow one of the above systems. The manuals are available from VitraGroup.

How do I order samples?

For initial colour selection, choose from our standard or metallic colour palette, the VitraGroup Fandeck or any other colour standard. You may then order coloured A4 cards for sample boards or 200x200 mm genuine VitraPanel® for each colour to be used on your project. Approval for samples may be required. Please contact our office, your representative or download a sample form (MS Word Format).

Does VitraPanel® require additional coating for graffiti protection?

No; Graffiti protection is an integral part of the VitraPanel® coating. No additional treatment is required. Graffiti can simply be wiped off without any disfigurement to the surface. Ask for a guide to graffiti removal. Graffiti removal

Do you have a concealed fixing system?

VitraGroup will approve, for certain projects and certain installers, a concealed fixing system based on VHB tape and structural silicon glue. Please contact us for details.

Can VitraPanel® be cut on site?

VitraGroup recommends ordering panels cut to the exact size and pre-finished. However, if there is some cutting necessary we supply cutting instructions and a touch-up kit for each project.

What coating system do you have?

System Vitrathane 643™ (basic VitraPanel® coating system, with standard 10 year warranty) Vitraflon 700™ (special high quality fluoro polymer coating which retains colour and gloss level for very long timeapprox. 60 years), extended warranty
Colour: VitraGroup can match any colour you want. We also have our own colour selection. Colours can be made in most gloss levels (from full gloss to low sheen). We also have many metallic colours and special effect colours like pearl and graphics.
All our products can be supplied with special low surface tension coating. This coating will make it difficult for dirt and fall out to stick and is designed for low maintenance and easy cleaning.

What testing has been performed on VitraPanel®?

VitraPanel® has been tested to some building standards for physical properties and fire resistance by CSIRO and other accredited laboratories.
Our coating system is tested continuously in our QUV accelerated weatherometers; Xenon arc tested by our resin supplier and tested by the Allunga accelerated natural sunlight testing facility.

QUV testing Australian Standard 1580.483.2

Xenon Arc Testing Australian Standard 1580.483.1

< Back

Features of VitraGroup Products

Graffiti and chemical resistance allows for quick and economical removal without affecting the surface.

Unique thermosetting factory finish withstands long-term exposure to changes in weather.

Tough coating on panel and edges prevents the adhesion or growth of bacteria and mould.

Resists pollution, grime and mildew. Impervious to chemicals, solvents and cleaning agents.

Ceramic like surface withstands being bumped or accidentally knocked by foreign objects.

Coatings continue to keep their as-new appearance for decades. Won't fade, blotch or ripple.

High soundproofing rating makes it ideal for use in airports, public transport schools and noise walls.

Thousands of standard, metallic, rainbow fleck, pearl and "flip" pearlescent colours to choose from.